• Databases
• SQL
• Status
• Variables
• Charsets
• Engines
• Privileges
• Replication
• Processes
• Export
• Import
• Synchronize

Runtime Information

Refresh Reset

This MySQL server has been running for 45 days, 3 hours, 40 minutes and 9 seconds. It started up on Sep 14, 2024 at 11:11 PM.

Server traffic: These tables show the network traffic statistics of this MySQL server since its startup.

Query statistics: Since its startup, 42,692,201 queries have been sent to the server.

Begin SQL query

Variable	Value	Description
Flush_commands	95	The number of executed FLUSH statements.
Last_query_cost	0	The total cost of the last compiled query as computed by the query optimizer. Useful for comparing the cost of different query plans for the same query. The default value of 0 means that no query has been compiled yet.
Slow_queries	0	The number of queries that have taken more than long_query_time seconds.

Begin InnoDB

Variable	Value	Description
Variables InnoDB Status
Innodb_buffer_pool_pages_data	1,758	The number of pages containing data (dirty or clean).
Innodb_buffer_pool_bytes_data	29 M
Innodb_buffer_pool_pages_dirty	0	The number of pages currently dirty.
Innodb_buffer_pool_bytes_dirty	0
Innodb_buffer_pool_pages_flushed	40 k	The number of buffer pool pages that have been requested to be flushed.
Innodb_buffer_pool_pages_free	6,431	The number of free pages.
Innodb_buffer_pool_pages_misc	2	The number of pages busy because they have been allocated for administrative overhead such as row locks or the adaptive hash index. This value can also be calculated as Innodb_buffer_pool_pages_total - Innodb_buffer_pool_pages_free - Innodb_buffer_pool_pages_data.
Innodb_buffer_pool_pages_total	8,191	Total size of buffer pool, in pages.
Innodb_buffer_pool_read_ahead_rnd	0	The number of "random" read-aheads InnoDB initiated. This happens when a query is to scan a large portion of a table but in random order.
Innodb_buffer_pool_read_ahead	0
Innodb_buffer_pool_read_ahead_evicted	0
Innodb_buffer_pool_read_requests	24 M	The number of logical read requests InnoDB has done.
Innodb_buffer_pool_reads	971	The number of logical reads that InnoDB could not satisfy from buffer pool and had to do a single-page read.
Innodb_buffer_pool_wait_free	0	Normally, writes to the InnoDB buffer pool happen in the background. However, if it's necessary to read or create a page and no clean pages are available, it's necessary to wait for pages to be flushed first. This counter counts instances of these waits. If the buffer pool size was set properly, this value should be small.
Innodb_buffer_pool_write_requests	11 M	The number writes done to the InnoDB buffer pool.
Innodb_data_fsyncs	3,774	The number of fsync() operations so far.
Innodb_data_pending_fsyncs	0	The current number of pending fsync() operations.
Innodb_data_pending_reads	0	The current number of pending reads.
Innodb_data_pending_writes	0	The current number of pending writes.
Innodb_data_read	20 M	The amount of data read so far, in bytes.
Innodb_data_reads	1,109	The total number of data reads.
Innodb_data_writes	44 k	The total number of data writes.
Innodb_data_written	1,917 M	The amount of data written so far, in bytes.
Innodb_dblwr_pages_written	40 k	The number of pages that have been written for doublewrite operations.
Innodb_dblwr_writes	891	The number of doublewrite operations that have been performed.
Innodb_have_atomic_builtins	ON
Innodb_log_waits	0	The number of waits we had because log buffer was too small and we had to wait for it to be flushed before continuing.
Innodb_log_write_requests	1,362 k	The number of log write requests.
Innodb_log_writes	1,986	The number of physical writes to the log file.
Innodb_os_log_fsyncs	1,996	The number of fsync() writes done to the log file.
Innodb_os_log_pending_fsyncs	0	The number of pending log file fsyncs.
Innodb_os_log_pending_writes	0	Pending log file writes.
Innodb_os_log_written	592 M	The number of bytes written to the log file.
Innodb_page_size	16 k	The compiled-in InnoDB page size (default 16KB). Many values are counted in pages; the page size allows them to be easily converted to bytes.
Innodb_pages_created	788	The number of pages created.
Innodb_pages_read	970	The number of pages read.
Innodb_pages_written	40 k	The number of pages written.
Innodb_row_lock_current_waits	0	The number of row locks currently being waited for.
Innodb_row_lock_time	0	The total time spent in acquiring row locks, in milliseconds.
Innodb_row_lock_time_avg	0	The average time to acquire a row lock, in milliseconds.
Innodb_row_lock_time_max	0	The maximum time to acquire a row lock, in milliseconds.
Innodb_row_lock_waits	0	The number of times a row lock had to be waited for.
Innodb_rows_deleted	0	The number of rows deleted from InnoDB tables.
Innodb_rows_inserted	868 k	The number of rows inserted in InnoDB tables.
Innodb_rows_read	1,754 k	The number of rows read from InnoDB tables.
Innodb_rows_updated	0	The number of rows updated in InnoDB tables.
Innodb_truncated_status_writes	0

Begin SSL

Variable	Value	Description
Ssl_accept_renegotiates	0
Ssl_accepts	0
Ssl_callback_cache_hits	0
Ssl_cipher
Ssl_cipher_list
Ssl_client_connects	0
Ssl_connect_renegotiates	0
Ssl_ctx_verify_depth	0
Ssl_ctx_verify_mode	0
Ssl_default_timeout	0
Ssl_finished_accepts	0
Ssl_finished_connects	0
Ssl_session_cache_hits	0
Ssl_session_cache_misses	0
Ssl_session_cache_mode	NONE
Ssl_session_cache_overflows	0
Ssl_session_cache_size	0
Ssl_session_cache_timeouts	0
Ssl_sessions_reused	0
Ssl_used_session_cache_entries	0
Ssl_verify_depth	0
Ssl_verify_mode	0
Ssl_version

Begin Handler

Variable	Value	Description
Handler_commit	1,312	The number of internal COMMIT statements.
Handler_delete	144 k	The number of times a row was deleted from a table.
Handler_discover	0	The MySQL server can ask the NDB Cluster storage engine if it knows about a table with a given name. This is called discovery. Handler_discover indicates the number of time tables have been discovered.
Handler_prepare	0
Handler_read_first	6,636 k	The number of times the first entry was read from an index. If this is high, it suggests that the server is doing a lot of full index scans; for example, SELECT col1 FROM foo, assuming that col1 is indexed.
Handler_read_key	7,907 k	The number of requests to read a row based on a key. If this is high, it is a good indication that your queries and tables are properly indexed.
Handler_read_last	1,084 k
Handler_read_next	1,691 M	The number of requests to read the next row in key order. This is incremented if you are querying an index column with a range constraint or if you are doing an index scan.
Handler_read_prev	3,715	The number of requests to read the previous row in key order. This read method is mainly used to optimize ORDER BY ... DESC.
Handler_read_rnd	15 M	The number of requests to read a row based on a fixed position. This is high if you are doing a lot of queries that require sorting of the result. You probably have a lot of queries that require MySQL to scan whole tables or you have joins that don't use keys properly.
Handler_read_rnd_next	568 M	The number of requests to read the next row in the data file. This is high if you are doing a lot of table scans. Generally this suggests that your tables are not properly indexed or that your queries are not written to take advantage of the indexes you have.
Handler_rollback	45	The number of internal ROLLBACK statements.
Handler_savepoint	0
Handler_savepoint_rollback	0
Handler_update	239 k	The number of requests to update a row in a table.
Handler_write	548 M	The number of requests to insert a row in a table.

Begin Query cache

Variable	Value	Description
Flush query cache
Qcache_free_blocks	6	The number of free memory blocks in query cache.
Qcache_free_memory	13 M	The amount of free memory for query cache.
Qcache_hits	15 k	The number of cache hits.
Qcache_inserts	7,093	The number of queries added to the cache.
Qcache_lowmem_prunes	0	The number of queries that have been removed from the cache to free up memory for caching new queries. This information can help you tune the query cache size. The query cache uses a least recently used (LRU) strategy to decide which queries to remove from the cache.
Qcache_not_cached	35 k	The number of non-cached queries (not cachable, or not cached due to the query_cache_type setting).
Qcache_queries_in_cache	1,998	The number of queries registered in the cache.
Qcache_total_blocks	4,024	The total number of blocks in the query cache.

Begin Threads

Variable	Value	Description
Show processes
Slow_launch_threads	0	The number of threads that have taken more than slow_launch_time seconds to create.
Threads_cached	7	The number of threads in the thread cache. The cache hit rate can be calculated as Threads_created/Connections. If this value is red you should raise your thread_cache_size.
Threads_connected	1	The number of currently open connections.
Threads_created	316	The number of threads created to handle connections. If Threads_created is big, you may want to increase the thread_cache_size value. (Normally this doesn't give a notable performance improvement if you have a good thread implementation.)
Threads_running	1	The number of threads that are not sleeping.
Threads_cache_hitrate_%	99.99 %

Begin Binary log

Variable	Value	Description
Binlog_cache_disk_use	0	The number of transactions that used the temporary binary log cache but that exceeded the value of binlog_cache_size and used a temporary file to store statements from the transaction.
Binlog_cache_use	0	The number of transactions that used the temporary binary log cache.

Begin Temporary data

Variable	Value	Description
Created_tmp_disk_tables	884 k	The number of temporary tables on disk created automatically by the server while executing statements. If Created_tmp_disk_tables is big, you may want to increase the tmp_table_size value to cause temporary tables to be memory-based instead of disk-based.
Created_tmp_files	0	How many temporary files mysqld has created.
Created_tmp_tables	8,788 k	The number of in-memory temporary tables created automatically by the server while executing statements.

Begin Delayed inserts

Variable	Value	Description
Delayed_errors	0	The number of rows written with INSERT DELAYED for which some error occurred (probably duplicate key).
Delayed_insert_threads	0	The number of INSERT DELAYED handler threads in use. Every different table on which one uses INSERT DELAYED gets its own thread.
Delayed_writes	0	The number of INSERT DELAYED rows written.
Not_flushed_delayed_rows	0	The number of rows waiting to be written in INSERT DELAYED queues.

Begin Key cache

Variable	Value	Description
Key_blocks_not_flushed	0	The number of key blocks in the key cache that have changed but haven't yet been flushed to disk. It used to be known as Not_flushed_key_blocks.
Key_blocks_unused	13 k	The number of unused blocks in the key cache. You can use this value to determine how much of the key cache is in use.
Key_blocks_used	4,619	The number of used blocks in the key cache. This value is a high-water mark that indicates the maximum number of blocks that have ever been in use at one time.
Key_read_requests	1,188 k	The number of requests to read a key block from the cache.
Key_reads	670	The number of physical reads of a key block from disk. If Key_reads is big, then your key_buffer_size value is probably too small. The cache miss rate can be calculated as Key_reads/Key_read_requests.
Key_write_requests	22 k	The number of requests to write a key block to the cache.
Key_writes	13 k	The number of physical writes of a key block to disk.
Key_buffer_fraction_%	20.15 %
Key_write_ratio_%	61.36 %
Key_read_ratio_%	0.06 %

Begin Joins

Variable	Value	Description
Select_full_join	0	The number of joins that do not use indexes. If this value is not 0, you should carefully check the indexes of your tables.
Select_full_range_join	0	The number of joins that used a range search on a reference table.
Select_range	1,228 k	The number of joins that used ranges on the first table. (It's normally not critical even if this is big.)
Select_range_check	0	The number of joins without keys that check for key usage after each row. (If this is not 0, you should carefully check the indexes of your tables.)
Select_scan	8,791 k	The number of joins that did a full scan of the first table.

Begin Replication

Variable	Value	Description
Rpl_status	AUTH_MASTER	The status of failsafe replication (not yet implemented).
Slave_heartbeat_period	0
Slave_open_temp_tables	0	The number of temporary tables currently open by the slave SQL thread.
Slave_received_heartbeats	0
Slave_retried_transactions	0	Total (since startup) number of times the replication slave SQL thread has retried transactions.
Slave_running	OFF	This is ON if this server is a slave that is connected to a master.

Begin Sorting

Variable	Value	Description
Sort_merge_passes	0	The number of merge passes the sort algorithm has had to do. If this value is large, you should consider increasing the value of the sort_buffer_size system variable.
Sort_range	19 k	The number of sorts that were done with ranges.
Sort_rows	15 M	The number of sorted rows.
Sort_scan	3,246 k	The number of sorts that were done by scanning the table.

Begin Tables

Variable	Value	Description
Flush (close) all tables Show open tables
Open_tables	81	The number of tables that are open.
Opened_tables	7,899	The number of tables that have been opened. If opened tables is big, your table cache value is probably too small.
Table_locks_immediate	66 k	The number of times that a table lock was acquired immediately.
Table_locks_waited	0	The number of times that a table lock could not be acquired immediately and a wait was needed. If this is high, and you have performance problems, you should first optimize your queries, and then either split your table or tables or use replication.

Begin Transaction coordinator

Variable	Value	Description
Tc_log_max_pages_used	0
Tc_log_page_size	0
Tc_log_page_waits	0

Begin

Variable	Value	Description
Binlog_stmt_cache_disk_use	0
Binlog_stmt_cache_use	0
Compression	OFF
Open_files	143	The number of files that are open.
Open_streams	0	The number of streams that are open (used mainly for logging).
Open_table_definitions	77
Opened_files	3,589 k
Opened_table_definitions	7,982
Performance_schema_cond_classes_lost	0
Performance_schema_cond_instances_lost	0
Performance_schema_file_classes_lost	0
Performance_schema_file_handles_lost	0
Performance_schema_file_instances_lost	0
Performance_schema_locker_lost	0
Performance_schema_mutex_classes_lost	0
Performance_schema_mutex_instances_lost	0
Performance_schema_rwlock_classes_lost	0
Performance_schema_rwlock_instances_lost	0
Performance_schema_table_handles_lost	0
Performance_schema_table_instances_lost	0
Performance_schema_thread_classes_lost	0
Performance_schema_thread_instances_lost	0
Prepared_stmt_count	0
Queries	43 M
Uptime_since_flush_status	1 days, 0 hours, 19 minutes and 55 seconds